Diesel Technology
Tool List FY 2006 - 07
Diesel Technology Department
785-890-6217
Student Services
800-316-4127
Minimum Required Tool List
Including but not limited to the following:
Punches and Chisels
• 3/8" x ¾" long taper punch
• 3/8" center punch
• ¼" cold chisel
• 5/8" cold chisel
Pliers
• Diagonal Cutting pliers 7"
• Needle nose pliers 6"
• Water pump pliers 12"
• 6" pliers (slip joint)
• Lever wrench vise grips 8"
Screwdrivers
• 9/32" stubby tip screwdriver
• 7/32" tip standard screwdriver
• 5/16" tip standard screwdriver
• 3/8" tip standard screwdriver
• #1 phillips screwdriver
• #2 phillips screwdriver
• #2 stubby phillips screwdriver
Combination Wrenches
• 3/8" combination wrench
• 7/16" combination wrench
• ½" combination wrench
• 9/16" combination wrench
• 5/8" combination wrench
• 11/16" combination wrench
• ¾" combination wrench
• 13/16" combination wrench
• 7/8" combination wrench
• 15/16" combination wrench
• 1" combination wrench
Miscellaneous Tools
• 24 oz. ball peen
• 3/8" drive plug socket 5/8"
• 3/8" drive plug socket 13/16"
• Feeler gauges .0015 to .040
• Spark plug gauge
• Allen wrench set, 1/16" to 3/8"
• 16 rolling head bar
• Gasket scraper
• Circuit Tester
¼" Drive
• ¼" drive socket, 7/32" roll cabinet (large as you can afford) or 10 drawer top box
• ¼" drive socket, ¼"
• ¼" drive socket, 9/32"
• ¼" drive socket, 5/16"
• ¼" drive socket, 11/32"
• ¼" drive socket, 3/8"
• ¼" drive socket, 7/16"
• ¼" drive socket, ½"
• ¼" universal joint
• ¼" ratchet
• ¼" breaker bar
• ¼" extension 2"
• ¼" extension 6"
3/8" Drive (all 12 point)
• 3/8" drive socket, 3/8"
• 3/8" drive socket, 7/16"
• 3/8" drive socket, ½"
• 3/8" drive socket, 9/16"
• 3/8" drive socket, 5/8"
• 3/8" drive socket, 11/16"
• 3/8" drive socket, ¾"
• 3/8" drive ratchet
• 3/8" drive extension, 3"
• 3/8" drive extension, 7 ½"
• 3/8" drive universal joint
½" Drive (all 12 point)
• ½" drive socket, 7/16"
• ½" drive socket, ½"
• ½" drive socket, 9/16"
• ½" drive socket, 5/8"
• ½" drive socket, 11/16"
• ½" drive socket, ¾"
• ½" drive socket, 13/16"
• ½" drive socket, 7/8"
• ½" drive socket, 15/16"
• ½" drive socket, 1"
• ½" drive socket, 1 1/16"
• ½" drive socket, 1 1/8"
• ½" drive socket, 1 3/16"
• ½" drive socket, 1 ¼"
• ½" drive ratchet
• ½" drive extension, 2 ½"
• ½" drive extension, 5"
• ½" drive hinge handle
• ½" drive universal joint
Suggested tools to be added to minimum set at mid-point:
3/8" drive Set of 6 point deep sockets (3/8" thru 7/8" ),
set of 6 point metric sockets (6 mm thru 19 mm),
12" extension, speed handle
½" drive Air impact wrench, 10" extension and set of impact sockets
Box wrenches 3/8" x 7/16" , ½" x 9/16" , 5/8" x 11/16" , ¾" x 7/8"
Combination wrenches 1 1/16" , 1 1/8" , 1 ¼" , and Set of 12 pt. metric ( 6 mm thru 19 mm)
Line wrenches 3/8" x 7/16" , ½" x 9/16" , 5/8" x 11/16" , 7/8" x ¾"
Ignition wrench set 13/64v thru 3/8"
Hammers 3 lb. Drilling hammer, 2 lb. dead blow
Tape measure 12 ft.
Punches and Chisels ¼ pin punch, 5/16 pin punch, 3/8 pin punch,
3/8 starting punch, 5/16 round nose chisel
Blow gun Regulated to 35 psi
Magnetic retrieving tool
Universal Brake adjusting tool
Hacksaw
Putty knife
Set of metric Allen Wrenches
Multimeter
Tool Box Large roll cabinet (depends on what you started with)
Northwest Kansas Technical College
1209 Harrison PO Box 668, Goodland KS 67735
1-800-316-4127
Contact us with any questions, comments, or suggestions.
(* Requires Adobe Acrobat Reader)